Images are representations only.
Fire Phone Card
Brand: Fike CorporationThe Fire Phone Card, P/N 10-2728, is the primary control component required to facilitate selective talk firefighter’s telephone operation.
It provides twenty (20) configurable switches that allow emergency response personnel to selectively connect remote fire phones to the emergency communication systems phone riser, which originates from the Digital Paging Module, P/N 10-2727.
This connection allows twoway communication between the master fire phone located in the Fire Command Center (FCC) and the connected remote phone(s) strategically located throughout the facility.
Each switch has a corresponding LED that when lit provides positive indication of the connected status of the fire phone.
The card is equipped with an integral sounder that provides audible indication of an incoming phone call.
Features- Source of the fire phone control module addressable loop (Series 500)
- 20 configurable switches for fire phone selection
- Supports connection of up to four (4) Supplemental Fire Phone cards, P/N 10-2730
- LED display of connected fire phone calls
- Communication over host control panel’s RS485 peripheral bus
- 24 Vdc from host control panel or remote power supply
- Mounts to Fire Command Center (FCC) enclosure’s dead-front door
Specifications
Brand
Approvals & Certifications
- CSFM
- FM
- UL
Current
- Alarm = 75 mA (All LEDs On), Standby = 53 mA (All LEDs Off)
Humidity
- 93 % RH
Operating Voltages
- 24 Vdc Regulated
Temperature Range
- 0° to 49° C (32° to 120° F)
